Getting Started; Attaching The Brush Head; Charging Your Philips Sonicare - Philips sonicare HX3641 Manual

Consult instructions for use.

Getting started

Attaching the brush head

Charging your Philips Sonicare

Using your Philips Sonicare toothbrush
1 Align the brush head so the bristles point in the same
direction as the front of the handle.
2 Firmly press the brush head down onto the metal
shaft until it stops.
Note: It is normal to see a slight gap between the brush
head and the handle. This allows the brush head to
vibrate properly.
1 Plug the USB charging cord into a wall adapter that is
connected to a electrical outlet.
2 Place the handle on the charger.
- The light of the battery level indicator illuminates
and the handle beeps twice. This indicates that the
toothbrush is charging.
Note: It can take up to 24 hours to fully charge the
battery, but you can use the Philips Sonicare toothbrush
before it is fully charged.
If you are using your Sonicare toothbrush for the first
time, it is normal to feel more vibration than when using
a non-electric toothbrush. It is common for first time
users to apply too much pressure. Only apply gentle
pressure and let the toothbrush do the brushing for you.
9
English