Edit Mode (Ii); Setting Up The Programmer Mpg-80; Programmer Connector; Connection - Roland SUPER JUPITER MKS-80 Owner's Manual

D. EDIT MODE ( 2 )
By using the optional programmer MPG-80, editing
or synthesizing operation will become considerably
quicker and easier.
a. Setting up the Programmer MPG'80
Use the supplied 6P DIN Cord for setup.
1) Programmer Connector
The Programmer Connector in the rear panel is to
connect the MPG-SO. Connecting any other device
to this connector will cause break down. Also,
never leave the cable connected here without the
MPG-80 connected to the other end.
* Through the Programmer Connector, direct
current of about 8V comes out. Please be careful
about handling,
2) Connection
Programmer Connector
27