Display Message Table - Roland SUPER JUPITER MKS-80 Owner's Manual

Display Message Table
DISPLAY
ACTION TAKEN
AUTO TUNE Tune Button pressed
EDIT TONE No ## Tone Button pressed
EDIT PATCH No ## Patch Button pressed
INSERT CARTRIDGE Cartridge mode selected
without Cartridge connected
LOAD all banks Load Button pressed
LOAD COMPLETE
LOAD # # # Load and Bank Buttons pressed
MEMORY PROTECTED Writing mode selected with
Protect Switch ON
REJECTED External MIDI device is unable
to receive or send signal
SAVE all banks Save Button pressed
SAVE COMPLETE
SAVE # # #
Save and Bank Buttons pressed
WRITE TONE * * Write/Execute and Tone Buttons
are pressed
WRITE PATCH * * Write/Execute and Patch Button
pressed
WRITTEN TONE ##
OPERATION
While auto tuning
While editing Tone Number ##
While editing Patch Number ##
Requesting to connect Memory Cartridge
Followed by pressing Write/Execute
Button, all banks will be loaded
Loading is completed
Followed by pressing Write/Execute
Button, selected banks ##•# will be
loaded
Requesting to set the Protect Switch to
OFF
Followed by pressing Write/Execute
Button, all banks will be saved
Saving is completed
Followed by pressing Write/Execute
Button, selected banks ### are saved
While writing Tone Number * *
While writing Patch Number * *
Tone Memory is properly written
WRITTEN PATCH ## Patch Memory is properly written