Tone Color Selection - Roland SUPER JUPITER MKS-80 Owner's Manual

c. Tone Color Selection
■ Tone Memory and Patch Preset
There are Two types of patch programs in the
MKS-80's memory.
One is called Tone Memory which is a tone color
with various parameter settings of such as VCO,
VCF, VGA, ENV sections. Up to 64 different Tone
Memories can be retained in memory and each Tone
Memory has its own number from 11 to 88 (we call
it Tone Number).
is program 56.
Another is called Patch Preset which is a combina¬
tion of a Tone Number or a pair of Tone Numbers
and various settings of effects and modes. A Patch
Preset can only remember the combination of the
Tone Number(s) and effect and mode settings, that
is, it has no ability of retaining the tone color itself.
Therefore, if The Tone Memory is edited or replaced
with a new tone color, the Patch Preset will accord¬
ingly altered. Up to 64 Patch Presets cah be stored
in memory, and each Patch Preset has a number
from 11 to 88 (we call it Patch Number).
* To assign
a
Tone Number or Patch Number,
simply press the relevant Bank and Number
Buttons.
e.g.) Press the Bank Button (.|) and the Number
Button(|)to select Program 56.
■ MEMORY AREA
Depending on the position of the Memory Area
Switch ® , available memory area will change as
shown below,
INT— Internal memory of the MKS'BO
A - Memory Cartridge Block A
B — Memory Cartridge Block B
At power up, Patch Preset 11 in the selected
memory area is automatically recalled. If, how¬
ever, the Memory Cartridge is not connected.
Patch Number 11 in the Internal memory will
be called.
9