To A Midi Device (Or Computer) - Roland SUPER JUPITER MKS-80 Owner's Manual

a. Saving the data in the MKS-SO to a MIDI device
(or computer)
0 Set the S/L Mode Switch O to the MIDI posi¬
tion.
(J) Set the MIDI Function Switch 0 to the III
position.
d) Set the Protect Switch of the receiver to the OFF
position.
@ Press the Save Button @ . The Display will
respond as shown right.
Here, if you wish to save the entire data in memory,
go straightly to step (D.
If you wish to select a bank or banks to be saved,
without releasing the Save Button 0, assign the
bank or banks by pressing the Bank Button (D .
(D While still holding the Save Button ©, press
the Write/Execute Button O . The Display will
respond as shown right.
And in about a second, saving will be completed
with the Display as shown right.
Then, the MKS-80 is returned to the condition
just before the Save Button © was pressed (in
the step ® ).
H •
}
•iri j. J. |;j ci r"! k i:-
bfli .-iE
'"'r
&
* The above is the example when banks 2 and 6 are
assigned.
© Set the Protect Switch of the receiver to the
ON position.
0 If not specifically required, set the MIDI Func¬
tion Switch @ to the ] or 11 position.
37