Editing A Tone Memory - Roland SUPER JUPITER MKS-80 Owner's Manual

b. Editting a Tone Memory
All the parameters in the Tone Section can be
edited to your taste as 'follows,
® Press the Tone Button ® , and the button lights
up and the Display wilt respond as shown below.
[[][] is the Tone Number currently called.
(D Assign the Tone Memory which you wish to edit
with a Bank Button ©and a Number Button ®).
(D By pressing the Parameter Forward Button ®,
go to the parameter whose value you wish to
change. If you happen to come too far, use the
Backward Button ©,
@ By using the Value Up © or Down © Button,
change the value as you like.
(D Repeat the step © and O as maney times as
necessary.
(D Press the Tone Button © to return to the Play
mode.
The editing operation does not automatically re¬
write the existing Tone Memory. If you wish to
retain the edited Tone Memory, writing operation
is required.
■ Repeat Function
If you wish to change the Parameter Number or
Parameter Vaiue quickly, hold down the relevant
buttons: Parameter Forward, Backward, Value Up
and Down Button, instead of releasing the button
each time.
■ Display response in Edit Mode
a. Parameter
b. Parameter value written in memory
c. Edited parameter value
* The edited parameter value Is not automatically
written into memory.
21