Specifying The Operation Mode - Roland SR-20HD Reference Manual

Direct streaming av mixer
Hide thumbs Also See for SR-20HD:
Table of Contents

Advertisement

Specifying the Operation Mode

Auto scan
[MENU] button Ó "Auto Switching" Ó select "Type",
1.
and then press the [VALUE/CURSOR] knob.
2.
Turn the [VALUE/CURSOR] knob to select "Auto Scan",
and then press the [VALUE/CURSOR] knob.
3.
Turn the [VALUE/CURSOR] knob to select a menu item,
and then press the [VALUE/CURSOR] knob.
Menu item
Explanation
Specifies the order in which video signals
are shown.
Sequence
Normal
Random
Video Input Duration
HDMI IN 1, 2
Specifies the time that the video is shown.
STILL IN 1, 2
If this is "OFF", video switching does not
affect the input.
Scene Duration
Scene A–E
4.
Turn the [VALUE/CURSOR] knob to change the value
of the setting, and then press the [VALUE/CURSOR]
knob.
5.
Press the [MENU] button to quit the menu.
HDMI IN 1–STILL 2 Ó switch in
the order of scenes A–E.
Switch randomly.
Video follows audio
[MENU] button Ó "Auto Switching" Ó select "Type",
1.
and then press the [VALUE/CURSOR] knob.
2.
Turn the [VALUE/CURSOR] knob to select "Video Follows
Audio", and then press the [VALUE/CURSOR] knob.
3.
Turn the [VALUE/CURSOR] knob to select a menu item,
and then press the [VALUE/CURSOR] knob.
Menu item
Explanation
Specifies the time until audio detection
Time
resumes after mic audio has been detected to
switch the video or scene.
Specifies the audio input to which auto-
Mic A, B Source
switching is applied for Mic A and Mic B.
Specifies the detection level for the audio
being input to the Mic A, B.
Mic A, B Sense
The higher the level, the more easily audio is
detected.
Specifies the video/scene that is output when
Mic A, B Select
audio is detected in Mic A, B.
Specifies the video/scene that is output when
Mic A + Mic B Select
audio is detected in both Mic A and Mic B.
Specifies the video/scene that is output when
Silent Select
there is no audio input in either Mic A or Mic B.
4.
Turn the [VALUE/CURSOR] knob to change the value
of the setting, and then press the [VALUE/CURSOR]
knob.
5.
Press the [MENU] button to quit the menu.
Video Operations
13

Advertisement

Table of Contents
loading

Table of Contents