8000 Room Controllers VC3000 Relay Pack Installation Guide Line Voltage Switching Relay Pack for use with VTR8350 and SER8350 Room Controllers TABLE OF CONTENTS Safety Information ....................2 Before You Begin ....................2 Important Symbols ..................... 5 Installation ......................6 Communication Wiring to VTR8350 or SER8350 Room Controller ......
Failure to follow these instructions can result in death, serious injury, or equipment damage. For additional information about anticipated transmission delays or failures of the link, refer to NEMA ICS 1.1 (latest edition), Safety Guidelines for the Application , Installation, and Maintenance of Solid State Control or its equivalent 028-0296-14_II-VT8000-VC3000_A4_EN www.viconics.com November 2021...
Page 3
• Refer to the Room Controller User Interface Guide for information on how to configure the Room Controller. Failure to follow these instructions can result in equipment damage. 028-0296-14_II-VT8000-VC3000_A4_EN www.viconics.com November 2021...
Page 4
• Do not drop or crush the Room Controller, or allow it to come into contact with liquids. • Do not use a damaged device (such as one with a cracked screen). Failure to comply with these recommendations will result in damage to the unit and void the manufacturer’s warranty. 028-0296-14_II-VT8000-VC3000_A4_EN www.viconics.com November 2021...
Products marked with this symbol state that the manuals must be consulted in all cases to any hazards. Alternating Current Direct Current Equipment protected throughout by DOUBLE INSULATION or REINFORCED INSULATION VTR8350 or SER8350 VC3000 Relay Pack Room Controller 028-0296-14_II-VT8000-VC3000_A4_EN www.viconics.com November 2021...
Using supplied lock nut, secure Relay Pack inside junction box to either main electrical junction box or electrical cabinet of the fan coil unit. 028-0296-14_II-VT8000-VC3000_A4_EN www.viconics.com November 2021...
3 - Power Common 3 - Power Common 3 - Power Common Warning: • Only one VC3404E5000 or VC3504E5000 Relay Pack with remote monitoring inputs can be used for a single VTR8350 or SER8350 Room Controller. 028-0296-14_II-VT8000-VC3000_A4_EN www.viconics.com November 2021...
• 10K type2 main temperature control • Auto detected (bypasses VTR8350 or SER8350 internal sensor) Warning: • Only one VC3404E5000 or VC3504E5000 Relay Pack with remote monitoring inputs can be used for a single VTR8350 or SER8350 Room Controller. 028-0296-14_II-VT8000-VC3000_A4_EN www.viconics.com November 2021...
• A VC3300E5000 is for a 90 to 277 Vac powered FCU-mounted Relay Pack with the following outputs: Three 90 to 277 Vac switching fan relay outputs Warning: • Only one VC3404E5000 or VC3504E5000 Relay Pack with remote monitoring inputs can be used for a single VTR8350 or SER8350 Room Controller. 028-0296-14_II-VT8000-VC3000_A4_EN www.viconics.com November 2021...
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Please check with your local government for instruction on disposal of this product. 028-0296-14_II-VT8000-VC3000_A4_EN www.viconics.com November 2021...
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. 028-0296-14_II-VT8000-VC3000_A4_EN www.viconics.com November 2021...
Need help?
Do you have a question about the 8000 and is the answer not in the manual?
Questions and answers