Table of Contents
Advertisement
Available languages
Available languages
˜ Working instructions
m
CAUTION! RISK OF INJURY AND DAMAGE TO
PROPERTY!
Wear gloves when handling the saw blade. In this way,
u
you avoid injury from cuts.
Do not use any blunt or bent blades or blades which
u
are damaged in any other way.
Before sawing the workpiece, check for hidden foreign
u
objects such as nails, screws. These must be removed.
Always insert a suitable saw blade.
u
Secure the workpiece with the aid of clamping devices
u
on the workbench.
Apply only as much pressure as is required for sawing.
u
If there is excessive pressure, the sawing blade may
bend and break.
Switch the product off immediately if the sawing blade
u
jams.
Spread the saw cut out and pull the blade out carefully.
Always stand to the side of the product when working.
u
Always make sure that the workplace is well ventilated.
u
Avoid over-stressing the product while working.
u
Regular cuts
Verify the saw blade is not touching the workpiece. Then,
switch on the product.
Apply the base plate
4 ]
[
Use even pressure, advancing at a steady pace when
making your cut. You can make horizontal, diagonal, or
vertical cuts.
When you are finished: First, switch off the product. Then,
pull the saw blade out of the workpiece.
Plunge cuts
(Fig. J)
Plunge cuts are very challenging and are associated with
a higher risk of injuries. Only use this technique if you are
familiar with it.
Plunge cuts may only be carried out in soft materials such
as wood or plasterboard and with short blades (max.
length 150 mm). There is a risk of kickback and personal
injury.
Place the front edge of the base plate
so that the saw blade does not touch the workpiece.
Turn the product on. Let the saw blade slowly plunge into
the workpiece.
When the workpiece depth has been cut through, continue
sawing as usual.
Flush cuts
(Fig. K)
With elastic bi-metal saw blades you can separate water
pipes, for example, flush to the wall.
Make sure that the saw blade is always longer than the
pipe diameter. There is a risk of kickback and personal
injury.
34 GB/IE
to the workpiece.
on the workpiece
4 ]
[
˜ Connecting the product to the Lidl
Home App
˜ Activate/deactivate the Bluetooth
function on the battery
Press and hold the
o
for 3 seconds to activate the Bluetooth function. The
orange LED of the charging level LEDs
Bluetooth function is enabled.
Release the
button
o
Press and hold the
o
for 10 seconds to deactivate the Bluetooth function. The
orange LED of the charging level LEDs
Bluetooth function is deactivated. In the Lidl Home app
the product is shown as offline.
˜ Connecting the product to the Lidl
Home App
NOTE
The product can only be connected to the Lidl Home
u
app if the battery pack
Only Smart Performance rechargeable batteries can be
u
connected to the Lidl Home app.
Press and hold the
o
for 3 seconds to activate the Bluetooth function.
Enable the Bluetooth function on your smartphone.
o
Open the Lidl Home app.
o
There are 3 different options to connect the product to the
o
Lidl Home app:
Connecting the product for the first time to the Lidl
Home app:
Add device
1.
Select
on the
app scans the area for available devices. The Lidl Home
app indicates if available devices have been found.
NOTE
If the Lidl Home app cannot find available devices,
u
continue with "No automatic suggestion of available
devices".
Go to add
2.
Tap
to show the available devices in the list.
3.
Tap
to select the battery pack
NOTE
Select only one device at a time. If there are check
u
marks for other products:
Tap
to clear the marks.
+
4.
Tap
.
5.
Tap
Done
to confirm the connection. The battery
pack
is listed in the
8 ]
[
button
on the battery pack
[
]
lights up. The
[
]
.
[
]
button
on the battery pack
[
]
goes off. The
[
]
is inserted in the product.
[
8 ]
button
on the battery pack
[
]
tab. The Lidl Home
.
[
8 ]
tab and can be selected.
8 ]
[
8 ]
[
8 ]
[
Advertisement
Chapters
Table of Contents
