Booster Function; Power Management; Control Lock - Smeg SY92IPX8 Instructions For Use Manual

Instructions for the user

6.10 Booster function

The booster function allows to activate the cooking zone at maximum power as long as 10 minutes. It
can be used to bring a large quantity of water to a boil rapidly or to broil meat.
Turn the knob clockwise to the "P" position for two seconds and then release; the symbol will
appear on the display. After 10 minutes the booster function will automatically be disabled and cooking
will continue at power level "9".
The booster function has priority over the heating accelerator function.

6.11 Power management

The hob is fitted with a power management module that optimises/limits
consumption. If the overall imposed power levels surpass the maximum limits
permitted, the electronic circuit board will automatically manage the power
supplied by the hot plates.
The module will try to maintain the maximum possible power levels supplied and
the levels imposed by the automatic management will appear on the display. The
flashing of a power indicates that it will automatically be limited to a new level
selected by the power management module.
Priority is given to the last zone set.

6.12 Control lock

The control lock is a device that protects the appliance from accidental or inappropriate use. With all the
cooking zones turned off, simultaneously turn the first two knobs to the left (position "A"). Keep them
turned until the symbols , appear on the display, then release the knobs.
In order to remove the control lock repeat the same operations previously described.
If the knobs have been kept rotated in the "A" position for more than 30 seconds a fault message
will appear on the display.
After a prolonged period of interruption to the power supply, the control lock will be deactivated. If this is
the case, turn it back on as described above.
16