Cleaning The Watch; Cleaning The Nylon Strap; Changing The Ultrafit Nylon Strap - Garmin HRM-PRO PLUS 010-13118-00 Owner's Manual

Cleaning the Watch

CAUTION
Some users may experience skin irritation after prolonged use of the watch, especially if the user has sensitive
skin or allergies. If you notice any skin irritation, remove the watch and give your skin time to heal. To help
prevent skin irritation, ensure the watch is clean and dry, and do not overtighten the watch on your wrist.
NOTICE
Even small amounts of sweat or moisture can cause corrosion of the electrical contacts when connected to a
charger. Corrosion can prevent charging and data transfer.
1 Wipe the watch using a cloth dampened with a mild detergent solution.
2 Wipe it dry.
After cleaning, allow the watch to dry completely.
TIP: For more information, go to garmin.com/fitandcare.

Cleaning the Nylon Strap

• Hand wash the nylon strap with a mild detergent, such as dishwashing liquid.
• Do not put the nylon strap in a washing machine or dryer.
• When drying the nylon strap, hang it up or lay it flat, and allow it to dry completely.
• For more information, go to garmin.com/fitandcare.

Changing the UltraFit Nylon Strap

1 Pull one end of the strap through the opening between the pin and the watch body.
2 Pull the other end of the strap through the other side of the device.
3 Attach the hook and loop closures on the strap to fit your wrist.
Device Information 109