Tektronix 11A34 Service Reference Manual page 9

p l i e r s
Tweezers
Static Control Mat
Wrist Strap
Using These
Procedures
2-6
The first-time user should familiarize memselves with the proceeding information
prior to performing the procedures in the parts that follow.
Conventions in this Manual
In these procedures, me following conventions are
and connectors (for example, MEASURE) on the
from a terminal or conkoller.
Initial Capital letters identify connectors, controls, and indicators (for
example, Posltion) on associated test equipment. Initial Capital letters also
in some steps, the first word is italicized to identify a step that contains a
verification and/or an adjustment instruction. For example, If
checked. If Adjust appears in the title, me step Involves an electrical
Examine
adjustment. lf is the first word in the title, the step involves
measurement limits that are used as calibration guides;
be interpreted as electrical specifications.
A heading system is used to readily identii the steps that contain performance
verification and/or adjustment inskuctions.
in the title of a step, an electrical specification is checked. If Adjuaf appears in
the title, the step involves an electrical adjustment. If
the title, the step concerns measurement limits that indicate whether the
instrument is operating properly; these limits are not to be interpreted as electrical
specifications.
used:
limits are
Check
For example, if is the first word
first word in
Checks and Adjustmenfs
to