Tektronix 11A34 Service Reference Manual page 4

Pan 1 Initial Setup
Pan 2 Enhanced
Accuracy
Pan 3a High Frequency
Response: Standard
Procedure
Mainframe High
Frequency Response
Amplifier Step Response
Amplifier Bandwidth:
Performance Verlflcatlon
Procedure
Bandwidth:
1 IA34 Service Reference
This seotton contains proceduresto
specifications, and to manually set all internal adjustments. This procedure
provides a logical sequence of check and adjustment steps, and is intended to
return the amplifier to specifted operation following repair, or as a pan of a routine
maintenance program. To functionally test the oscilloscope, perform the parts
which have a "yes" indication in the Functional Test column of Table
Measurement Limits, Specifications, Adjustments and Functional Test.
Refer to the llA34 User's Reference Supplement for more information about
advertised specifications and amplifier operation. At the beginning of each pan
the specifications or measurement limits are given. Then, the setup for each
procedure in that part provides information concerning test equipment setup or
interconnection. Refer to Table 2-2, Test Equipment for more information
concerning test equipment used in these setups.
Measurement
(Examine) (Check)
none
none
none
none
none none
difference between none
two waveform aber-
rations 34.5%
peak and 7% p-p
refer to Table 2-3
none
for the bandwidth
specifications
peak-peak mea-
none
Test
none
ves
successful
execution
none
HF4 so that the
and Cl-l4 aberra-
tions respectively,
are within 4.5%
peak and 7% p-p
none n o
none