Tektronix 11A34 Service Reference Manual page 23

'Alternate Probedure
used when the available mainframe is an 1130~Series.
only for the particular amplifier and mainframe combination examined and
adjusted during this procedure.
First, the mainframe performance Is characterized at the specification frequencies
using the signal standardizer.
Then, the ampllfler and makiframe
Finally, the displayed amplitude
determine the amplffler's contribution to the bandwidth.
waveform
The aberrations should
(0.35 dlvlslon) peak-to-peak. One major graticule dlvlslon = 20%.
Specification (Performance Veritlcatton)
Refer to Table 2-4 for me bandwidth specifications.
A peak-peak measurement 2345 mV.
Setup to bmlne Maintrams High Frequency Response
Performance ia
aberrations are displayed at 20% per dlvlslon.
is checked at the specification frequencies to
exceed 4.5% peak (0.275 division) and 7%
Generator
Coaxial Cable
Checks and Adjustments
is