Table of Contents
Advertisement
Instructions for the user
Cooking start: as well as setting a cooking duration, the cooking start time can
also be set (with a maximum delay of 12 hours in relation to the current time). To
set the cooking start/end time, proceed as follows:
•
Set the cooking duration as described in the previous point.
•
Within 5 seconds of last pressing key
cooking end time. Symbol
internal segments illuminated to show the end of cooking time. Use key
or
to set the cooking end time.
•
5 seconds after the last key is pressed, the display will show the current time
and the cooking start and end times, which will be represented by the
illuminated inside segments. The display segments will be constantly
illuminated as long as the current time is not the same as the cooking start
time; as soon as the current time reaches the set starting time, all the inside
segments will start to flash, indicating that the oven has started cooking.
•
At the end of the cooking time the timer will switch the oven heating elements
off, the beeps will start to sound and the numbers on the dial will flash.
•
To delete the entire set program, hold down the central key
if cooking has already started, the oven will have to be switched off manually.
•
Here we can see a programming example:
the current time is 7:06 and cooking is
programmed to start at 8.00 and end at
9.00.
•
At 8 o' clock the inside segments between 8
and 9 will start to flash,while the hours hand
will remain still.
Warning: for the oven to start cooking operations after the programming
procedures just described, the thermostat and functions switch knob must
be correctly set on the desired temperature and function.
6.7.4 Display brightness reduction
To reduce the energy consumption in stand-by,
reduce the display brightness. To restore the normal brightness, press
or
press key
will flash together with the current time, with
key can be pressed briefly to
again to set the
for 2 seconds;
again.
73
Advertisement
Table of Contents
