Table of Contents
Advertisement
Available languages
Available languages
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
of time between 1 and 12 hours.
of time between 1 and 12 hours.
will begin counting down.
will begin counting down.
DELAY
the selected wash cycle will be increased.
the selected wash cycle will be increased.
ENGLISH
ENGLISH
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
appears on the display; each time you press the button,
switches off and the wash cycle begins.
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
SLOVENSKY
will begin counting down.
will begin counting down.
DELAY
DELAY
ENGLISH
ENGLISH
the selected wash cycle will be increased.
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
switches off and the wash cycle begins.
of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
«h» switches off.
«h» switches off.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
ENGLISH
will begin counting down.
will begin counting down.
DELAY
DELAY
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
has been started.
has been started.
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
Tabuľka programov
switches off and the wash cycle begins.
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
«h» switches off.
«h» switches off.
DELAY
To adjust the delay time and select a shorter period of time,
DELAY
To adjust the delay time and select a shorter period of time,
will begin counting down.
the selected wash cycle will be increased.
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
has been started.
has been started.
appears on the display; each time you press the button,
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
DELAY
«h» switches off.
«h» switches off.
To adjust the delay time and select a shorter period of time,
will begin counting down.
will begin counting down.
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
Program
press the DELAY button. To cancel it, press the button
The start time of the program may be delayed for a period
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
Program
Program
appears on the display; each time you press the button,
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
has been started.
has been started.
repeatedly until the selected delayed start indicator light
of time between 1 and 12 hours.
switches off and the wash cycle begins.
switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
«h» switches off.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
the selected wash cycle will be increased.
will begin counting down.
will begin counting down.
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
Program
Program
Eco
has been started.
Eco
1
1
1 Eco
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
switches off and the wash cycle begins.
«h» switches off.
«h» switches off.
the selected wash cycle will be increased.
To adjust the delay time and select a shorter period of time,
will begin counting down.
To adjust the delay time and select a shorter period of time,
will begin counting down.
The DELAY function cannot be set once a wash cycle
Conventional
The DELAY function cannot be set once a wash cycle
Conventional
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
2
2
Program
Program
has been started.
Eco
has been started.
Eco
1
1
2 Auto
wash and dry
wash and dry
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
will begin counting down.
To adjust the delay time and select a shorter period of time,
«h» switches off.
To adjust the delay time and select a shorter period of time,
«h» switches off.
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
Conventional
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
Conventional
Intensive
Intensive
3
3
Program
2
2
has been started.
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
has been started.
Eco
wash and dry
wash and dry
Eco
1
1
3 Intenzívne
To adjust the delay time and select a shorter period of time,
«h» switches off.
«h» switches off.
Fast
Fast
4
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
4
The DELAY function cannot be set once a wash cycle
Intensive
Conventional
Intensive
Conventional
3
3
4 Rýchle
Program
Program
repeatedly until the selected delayed start indicator light
has been started.
has been started.
2
2
Eco
1
wash and dry
wash and dry
umývanie 30'
«h» switches off.
Sanitizing
Sanitizing
5
5
The DELAY function cannot be set once a wash cycle
Fast
Fast
4
4
5 Rýchle
Conventional
Intensive
Intensive
3
3
has been started.
2
Program
Program
Eco
Eco
1
1
wash and dry
umývanie
Pre-Wash
Pre-Wash
6
6
a sušenie
Sanitizing
Sanitizing
5
5
Fast
Fast
4
4
Conventional
Conventional
Intensive
3
Program
Program
2
2
Eco
Eco
1
1
6 Sklo
wash and dry
wash and dry
Self-Clean
Self-Clean
7
7
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Fast
4
Conventional
Conventional
Program
3
Intensive
3
Intensive
2
Eco
2
Eco
1
1
7 Tichý
wash and dry
wash and dry
Self-Clean
Self-Clean
7
7
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-Wash
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-Wash
6
6
5
Sanitizing
Fast
Fast
4
4
Conventional
Conventional
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Intensive
Intensive
3
3
2
2
Eco
1
8 Dezinfekcia
wash and dry
wash and dry
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
Self-Clean
Self-Clean
7
7
Pre-Wash
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Sanitizing
Sanitizing
5
5
Conventional
Fast
Fast
4
4
Intensive
Intensive
3
*) Not all options can be used simultaneously.
3
*) Not all options can be used simultaneously.
2
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
9 Predumývanie
wash and dry
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com
Self-Clean
7
Pre-Wash
Pre-Wash
6
6
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Sanitizing
Sanitizing
5
5
Fast
Fast
4
4
Intensive
3
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
10 Samočistenie
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Self-Clean
Self-Clean
7
7
Pre-Wash
Pre-Wash
6
6
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Sanitizing
Sanitizing
5
5
Pre-treatment of the dishes is not needed before any of the programs.
Fast
Pre-treatment of the dishes is not needed before any of the programs.
4
Údaje z programu ECO sú namerané v laboratórnych podmienkach podľa Európskej normy EN 60436:2020.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Poznámka pre skúšobné laboratóriá: Informácie o podmienkach porovnávacích skúšok EN si, prosím, vyžiadajte zaslaním emailu na
address: dw_test_support@whirlpool.com
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
Self-Clean
7
7
Pre-Wash
Pre-Wash
6
6
Sanitizing
5
nasledujúcu adresu: dw_test_support@whirlpool.com
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Príprava riadu pred umývaním nie je potrebná pri nijakom program.
*) Not all options can be used simultaneously.
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com
*) Nie všetky možnosti sa dajú použiť súčasne s inými.
Self-Clean
Self-Clean
7
7
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-Wash
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
6
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
**) Hodnoty, uvedené pre iné programy ako je eco program, sú iba informatívne. Skutočný čas sa môže líšiť v závislosti od mnohých
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
faktorov, ako sú teplota a tlak privádzanej vody, teplota v miestnosti, množstvo umývacieho prostriedku, množstvo a typ vloženého
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
Self-Clean
7
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
riadu, jeho rozloženie, ďalšie zvolené možnosti a kalibrácia senzoru.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
1. ECO -Eco program je vhodný na čistenie bežne znečisteného riadu a pre toto použitie je najúčinnejší z dôvodu kombinovanej spotreby
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
PROGRAMS DESCRIPTION
energie a vody a používa sa na hodnotenie súladu s právnymi predpismi EÚ o ekodizajne.
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
2. AUTO - Na normálne znečistený riad so zaschnutými zvyškami jedla. Sníma úroveň znečistenia riadu a podľa toho nastavuje program.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Počas snímania úrovne znečistenia senzorom sa na displeji zobrazí animácia a aktualizuje sa dĺžka cyklu.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
3. INTENZÍVNE -Program, odporúčaný na umývanie silne znečisteného riadu, je vhodný hlavne na umývanie panvíc a hrncov (nie je
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
vhodný na umývanie krehkých nádob).
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
4. RÝCHLE UMÝVANIE 30' - Program, ktorý sa používa pri polovičnom naplnení mierne zašpineným riadom bez zaschnutých zvyškov jedla.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Neobsahuje fázu sušenia.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
load, load balancing, additional selected options and sensor calibration.
5. RÝCHLE UMÝVANIE A SUŠENIE- Normálne znečistený riad. Každodenný cyklus, ktorý zabezpečuje optimálny výsledok umývania
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
a sušenia v kratšom čase.
6. SKLO - Program na krehké kusy riadu, ktoré sú citlivejšie na vysoké teploty, napríklad poháre a šálky.
PROGRAMS DESCRIPTION
7. TICHÝ - Vhodný na nočnú prevádzku spotrebiča. Zabezpečuje optimálne umývanie a sušenie s najnižšou hlučnosťou.
8. DEZINFEKCIA -Bežne alebo silne znečistený riad, s pridaním antibakteriálneho umývania. Možno ho použiť na údržbu umývačky.
9. PREDUMÝVANIE -Používa sa na opláchnutie riadu, ktorý bude umytý neskôr. Pri tomto programe sa nepoužíva umývací prostriedok.
10. SAMOČISTENIE - Program sa používa na údržbu umývačky, spúšťa sa, keď je umývačka PRÁZDNA, s použitím špeciálnych čistiacich
prostriedkov určených na údržbu umývačky.
Úprava prebiehajúceho programu
Ak ste zvolili nesprávny program, je možné ho zmeniť, za podmienky, že sa iba začal: otvorte dvierka, stlačte a podržte tlačidlo ZAP./VYP.
a spotrebič sa vypne. Znova spotrebič zapnite pomocou tlačidla ZAP./VYP. a zvoľte nový umývací cyklus a požadovanú možnosť; Spustite
cyklus stlačením tlačidla ŠTART/Pauza a zatvorením dvierok do 4 sekúnd.
Ak to trvá dlhšie ako 4 sekundy, spotrebič sa automaticky pozastaví a musíte ho znovu spustiť zopakovaním posledného úkonu.
Pridanie ďalšieho riadu
Bez vypnutia spotrebiča otvorte dvierka (LED dióda ŠTART/Pauza začne blikať) (pozor na HORÚCU paru!) a vložte nádoby do umývačky.
Stlačte tlačidlo ŠTART/Pauza a do 4 sekúnd zatvorte dvierka, cyklus bude pokračovať od bodu, v ktorom bol prerušený.
Náhodné prerušenia
Ak sa dvierka otvoria počas umývacieho cyklu alebo pri výpadku elektriny, cyklus sa pozastaví. Stlačte tlačidlo ŠTART/Pauza a do 4
sekúnd zatvorte dvierka, cyklus bude pokračovať od bodu, v ktorom bol prerušený.
Available
options
Available
50°
50°
50°
options
Available
55°
55°
50°
50°
50-60°
options
65°
65°
-
-
55°
55°
50°
50°
65°
-
-
50°
50°
-
-
Available
65°
65°
-
-
55°
55°
50°
50°
-
options
65°
65°
-
-
-
-
50°
50°
-
-
Available
65°
65°
-
-
55°
50°
50°
50°
options
-
-
-
-
-
-
65°
65°
-
-
-
-
50°
50°
-
-
Available
65°
-
55°
55°
options
50°
50°
45°
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
65°
-
-
-
Available
50°
-
65°
65°
-
-
55°
55°
options
50°
50°
50°
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
-
-
-
50°
50°
-
-
65°
65°
-
-
55°
55°
50°
65°
-
-
-
65°
65°
-
-
-
-
-
65°
65°
-
-
-
-
50°
50°
-
-
65°
65°
-
-
55°
-
-
-
-
65°
-
-
-
-
-
-
-
65°
65°
-
-
-
-
50°
50°
-
-
65°
-
65°
-
-
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
65°
-
-
-
50°
-
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
-
-
-
65°
65°
-
-
-
-
-
-
65°
-
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
NaturalDry
NaturalDry
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
NaturalDry
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
E
added together with the dishwasher. To see how to mount protec-
E
d
d
– enabled
ensure exceptional drying performance every day. Door opens at
– enabled
– disabled
– disabled
NaturalDry
NaturalDry
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
press and hold
As additional steam protection, special designed protection foil is
press and hold
button (3 sec).
button (3 sec).
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
E
E
d
d
– enabled
– enabled
– disabled
– disabled
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
NaturalDry
NaturalDry
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
press and hold
press and hold
button (3 sec).
button (3 sec).
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
Trvanie
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
NaturalDry
NaturalDry
E
E
d
d
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
– enabled
– enabled
Duration of
– disabled
Duration of
– disabled
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
Dostupné
umývacieho
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please
Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please
Available
wash pro-
wash pro-
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
consumption
funkcie (*)
programu
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
press and hold
which automatically opens the door during/after drying phase to
press and hold
button (3 sec).
button (3 sec).
status of NaturalDry functionality by pressing
options
gram
gram
*)
*)
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
NaturalDry
(litres/cycle)
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
E
d
(h:min)**)
– enabled
– disabled
Duration of
Duration of
(h:min)
(h:min)
**)
**)
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE).
Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please
Available
wash pro-
wash pro-
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to
consumption
press and hold
button (3 sec).
2:45
2:45
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
options
gram
gram
*)
*)
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at
(litres/cycle)
E
E
d
d
– enabled
– enabled
– disabled
– disabled
(h:min)
(h:min)
Duration of
Duration of
**)
**)
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
the temperature that is safe to your kitchen furniture.
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
Available
wash pro-
wash pro-
2:00
2:00
press and hold
press and hold
button (3 sec).
button (3 sec).
consumption
2:45
2:45
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
1:25 - 3:00
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
options
gram
gram
*)
*)
(litres/cycle)
E
E
d
d
– enabled
– enabled
– disabled
– disabled
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
button (6 sec).
Duration of
(h:min)
(h:min)
**)
**)
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows:
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
Available
2:30
wash pro-
2:30
2:00
2:00
press and hold
press and hold
button (3 sec).
button (3 sec).
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
options
2:45
gram
2:45
*)
E
E
d
d
button (6 sec).
– enabled
– enabled
– disabled
– disabled
Duration of
Duration of
(h:min)
**)
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
0:55
0:55
Available
wash pro-
wash pro-
2:30
2:30
press and hold
press and hold
button (3 sec).
button (3 sec).
status of NaturalDry functionality by pressing
consumption
2:00
2:00
2:45
options
gram
gram
*)
*)
E
d
– enabled
– disabled
(litres/cycle)
Duration of
(h:min)
Duration of
(h:min)
1:40
**)
1:40
**)
To confirm the change and exit from the Control Menu please
0:55
0:55
Available
wash pro-
wash pro-
press and hold
button (3 sec).
2:30
2:30
2:00
consumption
2:45
2:45
options
gram
gram
*)
*)
(litres/cycle)
0:10
0:10
Duration of
Duration of
(h:min)
(h:min)
1:40
1:40
**)
**)
0:55
0:55
Available
wash pro-
wash pro-
2:30
consumption
2:00
2:00
options
gram
gram
*)
*)
2:45
2:45
0:50
0:50
(litres/cycle)
Duration of
0:10
0:10
(h:min)
(h:min)
**)
**)
1:40
1:40
wash pro-
0:55
consumption
2:30
2:30
gram
2:00
2:00
*)
2:45
2:45
(litres/cycle)
0:50
0:50
(h:min)
**)
0:10
0:10
1:40
0:55
0:55
2:30
2:30
2:00
2:00
2:45
0:50
0:50
0:10
1:40
1:40
0:55
0:55
2:30
2:30
2:00
0:50
0:10
0:10
1:40
1:40
0:55
0:55
2:30
0:50
0:50
0:10
0:10
1:40
1:40
0:55
0:50
0:50
0:10
0:10
1:40
0:50
0:50
0:10
0:50
9
9
button:
button:
9
button:
button:
button:
button:
Spotreba
Water
Water
Energy
Energy
vody
consumption
consumption
consumption
button:
(litre/cyklus)
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Water
Energy
Energy
consumption
consumption
consumption
12.0
12.0
0.92
0.92
3:10
button:
9,5
button:
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Water
Energy
Energy
15.0
15.0
1.35
1.35
consumption
consumption
consumption
12.0
12.0
0.92
0.92
button:
7,0 - 14,0
button:
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Energy
15.0
15.0
1.50
1.50
15.0
consumption
15.0
1.35
consumption
1.35
button:
button:
12.0
12.0
0.92
0.92
2:50
14,0
(litres/cycle)
(kWh/cycle)
Water
Water
Energy
Energy
11.5
11.5
1.10
1.10
15.0
15.0
1.50
1.50
button:
consumption
consumption
consumption
15.0
15.0
1.35
1.35
12.0
0.92
0:30
9,0
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
11.5
11.5
1.30
1.30
Water
Water
Energy
Energy
11.5
11.5
1.10
1.10
15.0
15.0
1.50
1.50
15.0
1.35
consumption
consumption
consumption
12.0
12.0
0.92
0.92
1:25
11,5
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
Water
Water
Energy
Energy
11.5
11.5
1.10
1.10
15.0
1.50
consumption
consumption
consumption
15.0
15.0
1.35
1.35
12.0
12.0
0.92
0.92
1:40
11,5
8.0
8.0
0.80
0.80
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
4.5
4.5
0.01
0.01
Water
Energy
11.5
11.5
1.30
1.30
11.5
1.10
consumption
15.0
15.0
1.50
1.50
15.0
15.0
1.35
1.35
12.0
12.0
0.92
0.92
3:30
15,0
(kWh/cycle)
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
1.30
11.5
11.5
1.10
1.10
15.0
15.0
1.50
1.50
15.0
15.0
1.35
1.35
12.0
0.92
1:40
10,0
8.0
8.0
0.80
0.80
4.5
0.01
11.5
11.5
1.30
1.30
11.5
11.5
1.10
1.10
15.0
15.0
1.50
1.50
15.0
1.35
0:12
4,5
8.0
0.80
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
11.5
11.5
1.10
1.10
15.0
1.50
0:50
8,0
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
11.5
1.10
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
1.30
8.0
8.0
0.80
0.80
4.5
0.01
8.0
0.80
9
57
9
Spotreba
energie
(kWh/cyklus)
0,85
0,90 - 1,40
1,50
0,50
1,10
1,20
1,15
1,30
0,01
0,85
Advertisement
Table of Contents
