5. INSTALLATION AND TEST
5.2 CONNECT THE INLET HOSE
♦Verify that the rubber washer is inside of the valve
connector.
♦ Tighten the inlet hose s necurely to prevent leaks.
5.3 CONNECT THE DRAIN HOSE
Make sure that the hose is not twisted
※The end of the drain hose should be placed less than 49" from the floor
5.4 CONNECT POWER PLUG
Connect the power plug to the wall outlet
5.5 TEST OPERATION
Avoid submerging the end of the hose
·Avoid connecting several electric devices,
as doing so may cause a fire
12