Installation And Test; Connect The Inlet Hose; Connect The Drain Hose; Connect Power Plug - Hisense WFU7012 Service Manual

5. INSTALLATION AND TEST

5.2 CONNECT THE INLET HOSE

♦ Verify that the rubber washer is inside of the valve
connector.
♦ Tighten the inlet hose securely to prevent leaks.

5.3 CONNECT THE DRAIN HOSE

Make sure that the hose is not twisted
※ The end of the drain hose should be placed less than 96" from the floor

5.4 CONNECT POWER PLUG

Connect the power plug to the wall outlet

5.5 TEST OPERATION

Avoid submerging the end of the hose
·Avoid connecting several electric devices,
as doing so may cause a fire
11