ITS Telecom ITS-10.3HPi Installation Instructions Manual page 17

5.4 Add new heat pump
5.4.1 Select "Add Device" or
5.4.2 Read instructions and select "I am Ready"
5.4.3 Select Heat Pump Water Heater below "Manually add device"
5.4.4 Select "Swimming pool heat pump"
5.4.5 Enter your WI-FI router (2.4gHz) with password and select "Save"
5.4.6 On heat pump display hold UP and TICK for 3sec to activate WIF sync
( will flash top right corner). Tick "Operation completed" & "Next"
5.4.7 Select "Set WIFI"
5.4.8 In WIFI list select device starting "net_xx_xxxx" Password: 12345678. Select "Connect"
5.4.9 Pop up, select "Only this time" (May differ on phones).
5.4.10 Press back on phone to return to "iLetComfort App". App will run connection process
5.4.11 On successful connection, enter heat pump name & select "Save"
5.4.12 You will see heat pump in "Home screen"
5.4.1
5.4.5
+ symbol top right corner from "Home Screen"
5.4.2
5.4.6
ITS-Inverter Pool Heat Pump R32a 2024 - V1.3
5.4.3
5.4.7
5.4.4
5.4.8
P a g e 17 | 30