Operating Modes; Manual Date & Time Setting - ITS Telecom ITS-10.3HPi Installation Instructions Manual

4.7 Operating modes

Modes
4.7.1
1. Heating Mode
2. Cooling Mode
3. Pump Mode
Note: Only corresponding symbol will display for selected Mode.
"Pump Mode" only pump circulation allowed
Changing the mode can be done from the main screen.
4.7.2
On main screen press and use
4.7.1)
Anti-freeze Function
4.7.3
When the unit is busy defrosting, "Pb" will be display on
Note: After completing defrosting, the unit will automatically return to normal operation.
Temperature setting
4.7.4
On main screen press or
to main screen.
Note: After 60sec of inactivity, screen will return to main interface and save selected temperature.
4.8 Manual Date & Time setting
On main interface hold the
Press to save & move over to Month selection in the
Press to save & move over to Day selection in the
Press to save & move over to Hour selection in the
Press to save & move over to Minutes selection in the
Press to save & go back to main interface
Note: If connected via WIFI/App, dates & times will be updated automatically
& to select desired mode on the left of screen. Press
, set temperature will flash at
for 3sec, Year will flash on the
ITS-Inverter Pool Heat Pump R32a 2024 - V1.3
. Use or to adjust to desired temperature. Press
position, use or to adjust year.
flashing position, use or
flashing position, use or
flashing position, use or
flashing position, use or
to confirm, press to return to main display. (See
or
to adjust.
to adjust.
to adjust.
to adjust.
P a g e
to confirm & return
13 | 30