Function Short Cuts; Installation Settings; Startup & Shutdown - ITS Telecom ITS-10.3HPi Installation Instructions Manual

4.4 Function short cuts

Key combinations

4.5 Installation Settings

+ +
Press
Nr Designation
1 Network
2 Timer type
3 Temperature unit
4 Silence Mode
10 Boost
11 Smart grid
15 Manually defrosting
20 Operating time statistics
21 Pump forced operation
25 Water flow permanent malfunction (E0)
26 Time correction
Note: Thes settings must not be tampered with without the permission or guidance of ITS Heat Pumps
4.6 Startup & shutdown
Note: Screen back light will dim after 15sec of inactivity & "Key Lock" will be activated 120sec after inactivity.
To unlock control pad press and hold
Designation
Installation Settings
Press 3sec
Query unit operating
parameters
Press 3sec
Factory reset
Press 10sec
WIFI Activation
Press 3sec
Reset WIFI
Press 3sec
for 3sec to enter installation settings menu
Press & hold power button for 5sec to power on unit
-
LED light will go on
Press & hold power button for 5sec to switch off unit
- LED will turn off
ITS-Inverter Pool Heat Pump R32a 2024 - V1.3
Adjusting settings & parameters
Entering & Quitting menus
Restore unit settings to factory default
Activate WIFI function to connect to App
Removes all saved WIF settings
Function
WIFI Function on/off
(Do not adjust)
Select C° or F
Silent mode Function on/off
Boost mode Function on/off
(Do not avtivate)
(Do not activate)
(Do not activate)
Preset
(Do not activate)
(Do not Adjust)
& together for 1sec.
Function
P a g e 12 | 30