Canceling The Current Program; Options - Smeg PLA68XU Instruction Manual

EN
2.2.6

Canceling the current program

To cancel the program press start/pause (ref. 2 fi g. 2-02) until it stops (indica-
tor light on and beep). Press start/pause (ref. 2 fi g. 2-02) once again and hold
it down until the indicator lights of programs four and fi ve (ref. pr. 4, pr. 5 fi g.
2-03, marked "end") light up.
The water in the tray is drained and the program terminates at the point where
it was stopped.
2.2.7

Options

PROGRAM DELAY
The "Program delay" function delays the beginning of the washing program
by 3, 6 or 9 hours from the moment in which programming takes place. This
makes it possible to use the dishwasher at a certain time of day.
Before programming a delay, select the required washing program (see para
2.2 "Setting the washing program and switching on and off").
Select the delay by pressing the program delay button (ref. 6 fi g. 2-02) in se-
quence, depending on the delay you wish to set; the corresponding indicator
light will shine (ref. 7 fi g. 2-02).
The dishwasher will perform a pre-wash cycle, after which the preset "pro-
gram delay" will commence (the indicator light (ref. 7 fi g. 2-02) corresponding
to the time remaining before the program starts and the indicator light (ref. 4 fi g.
2-02) indicating the set program, start fl ashing).
10
USER INSTRUCTIONS
4
5
Fig. 2-03
Rev 0.0