USER INSTRUCTIONS
5.4
Cleaning the fi lter unit
•
Periodically inspect the fi lter unit (ref. A fi g. 5-05) and, if necessary, clean it
under running water (at room temperature), using a stiff brush. To remove
the fi lter, grip the tabs, turn anticlockwise and lift upwards;
•
push the centre fi lter (ref. A fi g. 5-06) from the underside to remove it from
the micro-fi lter;
•
separate the two parts which make up the plastic centre fi lter by pressing
the body of the fi lter in the zone shown by the arrows (ref. B fi g. 5-06);
•
remove the centre fi lter by lifting it upwards.
•
after cleaning, remount the fi lter unit, joining the two parts comprising the
centre fi lter by pushing slightly until they click into place; insert the centre
fi lter into the micro-fi lter (see fi g. 5-06). Reposition the fi lter unit (ref. A fi g.
5-05) into its seat, turning it clockwise until it locks.
A
Rev 0.0
B
B
Fig. 5-05
Fig. 5-06
37
EN