Cancelling The Current Program; Changing The Program - Smeg DI6012-1 User Manual

PROGRAM DELAY
The start of the program can be delayed by 3, 6 or 9 hours.
This allows you to set the dishwasher to work at the times of day most
convenient to you. After setting the program, press the button to select
the delay you require; the corresponding light will come on. When the
door is closed, the appliance will prewash the dishes, after which the
"program delay" set will come into effect. If you wish to exit the
procedure without setting delayed start, press the button in sequence
until all three lights are out.
N.B.: It is not possible to select the PROGRAM DELAY option once the
cycle has begun.

CANCELLING THE CURRENT PROGRAM

•
To cancel the currently selected program open the door and hold
down the PROGRAM SELECTION (3) button for a few seconds
until the
simultaneously (marked "end").
•
Close the door.
•
After approximately 1 minute the dishwasher will advance to the end
of cycle.

CHANGING THE PROGRAM

To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new program.
16
User instructions
indicator lights for programs 4 and 5 illuminate