Breath Sampling With The Funnel - Dräger Alcotest 7000 Instructions For Use Manual

en |
Use
To take a passive breath sample:
1. Hold the device, which is ready to measure, into the air to be
analyzed without a mouthpiece.
2. Tap the
 If alcohol is detected, the message ALCOHOL is displayed
and the red LED lights up (see Figure 2 on the fold-out page:
H).
 If no alcohol is detected, the message NO ALCOHOL is
displayed and the green LED lights up (see Figure 2 on the
fold-out page: G).
 In the results display, PASSIVE is also displayed.
3. Press the
4.7

Breath sampling with the funnel

4.7.1 Taking a breath sample
CAUTION
Hygiene
► Do not touch the upper part of the funnel.
► Always maintain a distance of 2-3 cm from the object or subject to
be tested.
► Do not touch excretions, surfaces or a subject's skin with the
funnel.
► Avoid direct contact with substances to be tested.
► Replace contaminated funnels.
CAUTION
Incorrect measurement results
If multiple samples are taken over a short period of time, there is a risk
of condensation building up inside the funnel and entering the device.
► Replace the funnel if condensate or droplets are visible.
Before taking the breath sample, ensure that the correct measuring
mode has been selected.
40
button to initiate the measurement.
button to continue with the next measurement.
®
Dräger Alcotest 7000