Document Conventions; Key To Symbols; General Safety Instructions - Bosch CL Series Installation, Operation And Maintenance Manual

Document Conventions

1 Document Conventions

1.1 Key to Symbols

1.1.1 Warnings
Warnings in this document are identified by a warning triangle
followed by a signal word.
Signal word at the beginning of a warning indicate the type and
seriousness of the ensuing risk if measures to prevent the risk are
not taken.
The following signal words are defined and can be used in this
document:
DANGER
DANGER indicates a situation that, if not avoided, will result in
death or serious injury.
WARNING
WARNING indicates a situation that, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a situation that, if not avoided, could
result in minor to moderate injury.
NOTICE
NOTICE is used to address practices not related to personal
injury.
1.1.2 Important Information
This info icon indicates important information where there is
no risk to property or people.
4 |
1.1.3 Additional Symbols
Symbol
 A step in an action sequence.
A reference to a related part in the document.

• A list entry.
— A list entry (second level)
Table 1 Additional Symbols

1.2 General Safety Instructions

DANGER
Personal Injury Hazard or Property Damage!
Improper installation, adjustment, alteration, service,
maintenance, or use can cause explosion, fire, electrical
shock, or other conditions that may cause death, serious
personal injury and/or property damage. Consult a qualified
installer, service agency, or your distributor or branch for
information or assistance. The qualified installer or agency
must use factory-authorized kits or accessories when
modifying this product. Refer to the individual instructions
packaged with the kits or accessories when installing.
DANGER
Electric Shock!
Before performing service or maintenance operations on the
system, turn OFF main power to the unit. Electrical shock will
cause personal injury or death.
WARNING
Personal Injury Hazard!
Installation and servicing of this equipment can be hazardous
due to system pressure and electrical components. Only
trained and qualified personnel should install, repair, or
service the equipment.
WARNING
When working on equipment, always observe precautions
described in the literature, tags, and labels attached to the
unit. Follow all safety codes. Wear safety glasses and work
gloves. Use a quenching cloth for brazing, and place a fire
extinguisher close to the work area.
CL Series Heat Pumps — 8733838716 (2024/05)
Meaning