Table of Contents
Advertisement
3 | Document Conventions
DOCUMENT CONVENTIONS
Key to Symbols
Warnings
Warnings in this document are identified by
a warning triangle printed against a gray
background. Keywords at the start of the
warning indicate the type and seriousness
of the ensuing risk if measures to prevent
the risk are not taken.
The following keywords are defined and can be
used in this document:
•
indicates a situation that, if not
DANGER
avoided, will result in death or serious injury.
•
WARNING indicates a situation that, if not avoided,
could result in death or serious injury.
•
CAUTION indicates a situation that, if not avoided,
could result in minor to moderate injury.
•
NOTICE is used to address practices not related to
personal injury.
Important Information
This symbol indicates important
information where there is no risk to
property or people.
SAFETY WARNINGS
IMPORTANT: Read the entire instruction
manual before starting installation.
WARNING: Installation and servicing of this
equipment can be hazardous due to system
pressure and electrical components. Only
trained and qualified personnel should
install, repair, or service the equipment.
WARNING: Before performing service or
maintenance operations on the system, turn
off main power to the unit. Electrical shock
could cause personal injury or death.
8733954853 (2020/04)
CAUTION: When working on equipment,
always observe precautions described in
the literature, tags, and labels attached to
the unit. Follow all safety codes. Wear
safety glasses and work gloves. Use a
quenching cloth for brazing, and place a fire
extinguisher close to the work area.
NOTICE: To avoid the release of refrigerant
into the atmosphere, the refrigerant circuit
of this unit must be serviced only by
technicians who meet local, state, and
federal proficiency requirements.
NOTICE: All refrigerant discharged from this
unit must be recovered WITHOUT
EXCEPTION. Technicians must follow
industry accepted guidelines and all local,
state, and federal statutes for the recovery
and disposal of refrigerants. If a compressor
is removed from this unit, refrigerant circuit
oil will remain in the compressor. To avoid
leakage of compressor oil, refrigerant lines
of the compressor must be sealed after it is
removed.
NOTICE: To avoid equipment damage, DO
NOT use these units as a source of heating
or cooling during the construction process.
Doing so may affect the unit's warranty. The
mechanical components and filters will
quickly become clogged with construction
dirt and debris, which may cause system
damage or failure.
WARNING: This product can expose you to
chemicals including Lead and Lead
components, which are known to the State
of California to cause cancer and birth
defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov.
Subject to change without prior notice
Greensource CDi Series TW Model
Greensource CDi Series TW Model
Hide quick links:
Advertisement
Table of Contents
