Listen To An External Device - Philips 5000 Series User Manual

3
Wait until you hear voice prompt
from the soundbar.
» If the successfully connected, the
BT indicator will light up solidly
blue.
4
Select and play audio files or music
on your Bluetooth device.
• During play, if a call is coming,
music play is paused. Play resumes
when the call ends.
• If your Bluetooth device supports
AVRCP profile, on the remote
control you can press
to skip to a track, or press
pause/resume play.
If your mobile phone supports LE
Audio, you can experience and
enjoy this new feature.
1
Press the button on the soundbar
or (Source) on the remote control
to select the BT (LE Audio) mode.
» The BT indicator will blink white.
2
On the LE Audio device, open
settings and switch on Bluetooth
(Ensure the LE Audio function is
activated on your LE Audio device),
search for and select Philips
TAB5309-LEA to start connection.
LED Status
Blue BT
White BT (LE Audio)
To exit Bluetooth, you can:
•
Switch the unit to another source.
•
Disable the function from your
Bluetooth device. Or place your
Bluetooth device out of the maximum
operational range. The Bluetooth
device will be disconnected from the
unit after the voice prompt.
•
Press and hold the
soundbar.
/
to
Name
Philips TAB5309
Philips TAB5309-LEA
button on the
Note
•
In an open space without obstructions.
The maximum operational range
between the soundbar and a Bluetooth
device is approximately 10 meters (30
feet).
•
Compatibility with all Bluetooth devices is
not guaranteed.
•
The music streaming may be interrupted
by obstacles between the device and
soundbar, such as wall, metallic casing
that covers the device, or other devices
nearby that operate in the same
frequency.

Listen to an external device

Ensure that the soundbar is connected to
the TV or audio device.
1
Press the (Source) button
repeatedly on the soundbar or on
the remote control to select the
HDMI ARC, OPT, AUX mode.
» The indicator light on the
soundbar will show which mode
is currently in use.
2
Operate your audio device directly
for playback features.
3
Press the +/- (Volume) buttons to
adjust the volume to your desired
level.
Note
•
While in Optical/HDMI ARC mode, if
there's no sound output from the unit,
you may need to activate PCM or Dolby
Digital Signal output on your source
device (e.g. TV, DVD or Blu-ray player).
EN 17