Play From Bluetooth Devices; Listen To An External Device - Philips 7000 Series User Manual

Play from Bluetooth
devices
Through Bluetooth, connect the
soundbar with your Bluetooth device
(such as an iPad, iPhone, iPod touch,
Android phone, or laptop), and then you
device through your soundbar speakers.
1
Press the Source button repeatedly
on the unit or press BT/Pair button
on the remote control to switch the
Soundbar to Bluetooth mode.
» The BT indicator will blink.
2
On the Bluetooth device, switch
on Bluetooth, search for and select
Philips TAB7007 to start connection
(see the user manual of the Bluetooth
device on how to enable Bluetooth).
» During connection, the BT
indicator will blink.
3
Wait until you hear voice prompt
from the Soundbar.
» If the successfully connected, the
BT indicator will light up solidly.
4
on your Bluetooth device.
•
During play, if a call is coming,
music play is paused. Play
resumes when the call ends.
•
If your Bluetooth device supports
control you can press
to skip to a track, or press
pause/resume play.
To exit Bluetooth, you can:
•
Switch the unit to another source.
16
EN
•
•
•
•
•

Listen to an external device

Ensure that the soundbar is connected to
the TV or audio device.
1
/
to
LED
AUX/USB
Optical
HDMI (ARC)
Disable the function from your
Bluetooth device. Or place your
Bluetooth device out of the maximum
operational range. The Bluetooth
device will be disconnected from the
unit after the voice prompt.
Press and hold the BT/Pair button
on the remote control or the Source
button on the unit.
Note
In an open space without obstructions.
The maximum operational range between
the soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
Compatibility with all Bluetooth devices is not
guaranteed.
The music streaming may be interrupted by
obstacles between the device and soundbar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.
Press the Source button repeatedly
on the unit or press the AUX,
Optical, HDMI ARC buttons on the
remote to select the desired mode.
» The indicator light on the
soundbar will show which mode is
currently in use.
State
• Solid
• Solid
• Solid
Source
AUX
Optical
HDMI ARC