Leds Display On/Off Indicator; Dts Virtual X; Auto. Volume Leveling; Play From Bluetooth Devices - Philips 5000 Series User Manual

LEDs display On/Off
Indicator
Press and hold
remote control for 5 seconds will enable/
disable LEDs display.
» OFF: The LEDs brightness will
return normal once you press any
button. LEDs should be turned
off automatically after idling for
10 seconds.
» ON: The LEDs brightness will not
self-extinguish.
Tips
•
During standby, the Standby LED shall turn
on regardless LEDs display OFF setting.

DTS Virtual X

DTS Virtual:X allows you to enjoy multi-
dimensional sound regardless of room
size, layout, or speaker configuration.
DTS Virtual:X technology features
DTS's proprietary virtual height and
virtual surround processing to deliver
an immersive sound experience from
any type of input source and speaker
configuration.
Press the button on the remote control
to enable or disable virtual on.
Status
LED State
ON
(Two center LEDs spread out to right/left)
●
OFF
(left / right LEDs close to the center)
• ON: This mode uses DTS Virtual:X
with virtual height and virtual
surround processing to realize a
three-dimensional sound field
when the height speakers are not
used.
• OFF: Do not use "DTS Virtual:X".
16
EN
(Mute) button on the
( )
●●
( )
●

Auto. volume leveling

Press the AVL button to switch Auto
volume leveling ON/OFF or night mode.
Status
LED State
OFF
ON
NIGHT
● ● ● ● ● ●
• OFF: Do not use "Auto volume".
• ON: Responds in real time to
different sources and types of
content to maintain consistent
loudness.
• NIGHT: Maintain even loudness for
all sources and types of content,
and enhanced vocal and dialogue
to make it easier to hear in a quiet
listening environment.
Play from Bluetooth
devices
Through Bluetooth, connect the soundbar
with your Bluetooth device (such as an
iPad, iPhone, iPod touch, Android phone,
or laptop), and then you can listen to the
audio files stored on the device through
your soundbar speakers.
1
Press the button on the soundbar
or (Source) on the remote control
to select the BT (Bluetooth) mode.
» The BT indicator will blink blue.
2
On the Bluetooth device, switch
on Bluetooth, search for and select
Philips TAB5309 to start connection
(see the user manual of the
Bluetooth device on how to enable
Bluetooth).
» During connection, the BT
indicator will blink blue.
● ●
● ● ● ●