Prepare The Remote Control - Philips 5000 Series User Manual

Prepare the Remote
Control
•
The provided Remote Control allows
the unit to be operated from a
distance.
•
Even if the Remote Control is
operated within the effective range
19.7 feet (6m), remote control
operation may be impossible if there
are any obstacles between the unit
and the remote control.
•
If the Remote Control is operated
near other products which generate
infrared rays, or if other remote
control devices using infra-red rays
are used near the unit, it may operate
incorrectly. Conversely, the other
products may operate incorrectly.
Replace the Remote Control Battery
1
Press and slide the back cover to
open the battery compartment of
the remote control.
2
Insert two AAA size batteries
(included). Make sure the (+) and (–)
ends of the batteries match the (+)
and (–) ends indicated in the battery
compartment.
3
Close the battery compartment
cover.
Precautions Concerning Batteries
•
Be sure to insert the batteries with
correct positive " " and negative
" " polarities.
•
Use batteries of the same type.
Never use different types of batteries
together.
•
Either rechargeable or non-
rechargeable batteries can be used.
Refer to the precautions on their
labels.
•
Be aware of your fingernails when
removing the battery cover and the
battery.
•
Do not drop the remote control.
•
Do not allow anything to impact the
remote control.
•
Do not spill water or any liquid on the
remote control.
•
Do not place the remote control on a
wet object.
•
Do not place the remote control
under direct sunlight or near sources
of excessive heat.
•
Remove the battery from the remote
control when not in use for a long
period of time, as corrosion or
battery leakage may occur and result
in physical injury, and/or property
damage, and/or fire.
•
Do not use any batteries other than
those specified.
•
Do not mix new batteries with old
ones.
•
Never recharge a battery unless it is
confirmed to be a rechargeable type.
EN 9