Play Audio Through Usb; Factory Reset - Philips 5000 Series User Manual

Play audio through USB

Enjoy audio on a USB storage device, such
as an MP3 player and USB flash memory,
etc.
1
Insert the USB device.
2
Press the (Source) button
repeatedly on the soundbar or on
the remote control to select the USB
mode.
3
During playback:
Button Action
Start, pause or resume play
Skip to the previous track
Skip to the next track
Note
•
This product may not be compatible with
certain types of USB storage devices.
•
If you use a USB extension cable, USB
hub, or USB multifunctional card reader,
the USB storage device may not be
recognized.
•
Do not remove the USB storage device
while reading files.
•
The system can support USB devices with
up to 128 GB of memory.
•
This system can play MP3/WAV/FLAC.
•
Support a USB port: 5V
18
EN
500mA.

Factory reset

Reset device to default setting.
•
Turn on the soundbar, press and hold
the and buttons at the same
time for 8 seconds.
» All LEDs light up for 5 seconds,
standby LED in Red.
Item
EQ
Master Volume
Subwoofer Volume
Treble
Surround
Auto Volume
Night
Source
BT pairing info
AV SYNC
DISPLAY
Auto Standby (Auto
Power Down)
Dialogue enhancement OFF
Default settings
Movie
10
0
0
OFF
OFF
OFF
HDMI-ARC
Clear
0
ON
ON