Other Features; Set The Sleep Timer; Set The Alarm Timer; Listen To An External Device - Philips DTM5095/93 User Manual

8 Other features

Set the sleep timer

This docking system can switch to standby
automatically after a set period of time.
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period of
time (in minutes).
» When sleep timer is activated,
displayed.
To deactivate sleep timer
1
Press SLEEP/TIMER repeatedly until
[SLEEP OFF] (sleep off) is displayed.
» When sleep timer is deactivated,
disappears.

Set the alarm timer

This docking system can be used as an alarm
clock. You can select CD, FM TUNER, iPod/
iPhone/iPad, or USB as alarm source.
Note
•
Ensure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER until [SET TIMER](set timer) scrolls
on the display.
2
Press CD, USB, DOCK, or TUNER to
select a source.
3
Press SLEEP/TIMER to confirm.
» The hour digits are displayed and begin
to blink.
4
Press / to set the hour, and then
press SLEEP/TIMER again.
» The minute digits are displayed and
5
Press
6
Press SLEEP/TIMER to confirm.
» The alarm timer is set and activated.
Note
•
To exit the alarm timer setting without storing, press
MENU/
Activate and deactivate the alarm
is
timer
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate the alarm
timer.
» If the alarm timer is activated,
» If the alarm timer is deactivated,
Note
•
If CD/USB/DOCK source is selected, but no disc is
placed or no USB/iPod/iPhone/iPad is connected, the
FM TUNER is selected automatically.

Listen to an external device

You can also listen to an external audio device
through this docking system.
1
Press MP3 LINK to select audio in source.
2
Connect the supplied MP3 link cable to:
•
•
3
Start to play the device. (See the device
user manual).
begin to blink.
/ to set the minute.
.
displayed
disappears.
the MP3 LINK jack on the back of the
unit
the headphone jack on the device
is
EN 17