15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on this apparatus. 16. The AC plug of the power supply cord shall remain readily operable. • Electro-Voice does not recommend use of ZxA1 speakers outdoors in direct exposure envi- ronments.
Description Thank you for choosing the Electro-Voice ZxA1 loudspeaker system. Please take time to consult this manual so that you can understand all the features built into your EV system and fully utilize all its performance capabilities. The Electro-Voice ZxA1 powered loudspeaker is a fully integrated audio system with carefully matched electronics and transducers.
Tripod and Floor Monitor Operation Floor Monitor Electro-Voice ZxA1 loudspeakers may be used as a floor monitor by placing the speaker on the integral monitor angle. Make sure to: • Place the speaker on a level, stable surface that is solid and secure.
Suspending ZxA1 Loudspeakers Electro-Voice ZxA1 loudspeakers may be safely suspended with single stud fittings by using the MP1 suspension kit, or quickly attached to a truss by using the CA-Zx truss clamp adaptor (both sold seper- ately). See MP1 or CA-Zx instruction sheets for proper assembly and use.
3. Rotate the logo badge, in 90° increments, to the desired orientation. 4. Release the logo badge and let it “spring” back Figure 6: into the logo recess. Rotating the ZxA1 Logo Electro-Voice® ZxA1 Owner’s Manual...
230V). Be cautious of what else is plugged into the same electrical service line to avoid electrical prob- lems and poor performance. CAUTION: Before turning the power on, make sure that the level controls are down to avoid transients or unexpected loud sound. Figure 7: ZxA1 Amplifier Panel Electro-Voice® ZxA1 Owner’s Manual...
Page 9
IEC-plug is supplied. For 120V operation, the AC voltage must be 95V - 132V. For 230V operation, the AC voltage must be 190V - 264V. Locking IEC power cords may also be used. Figure 8: ZxA1 Amplifier Controls Electro-Voice® ZxA1 Owner’s Manual...