ZLX-G2 Full-range loudspeaker
Low Pass:
Table 9.6: DSP settings loudspeaker and subwoofer stacked
9.2
Passive loudspeakers
Caution!
For optimal acoustics and performance, we recommend using the ZLX-G2 with a Dynacord
!
DSP power amplifier, programmed with the appropriate speaker settings included in the EV
Speaker Database for SONICUE. Failure to use the proper amplifier and speaker settings
may result in poor acoustic performance, cause permanent damage, and void of warranty.
9.2.1
Basic stereo system using full-range systems
The configuration includes:
–
–
Pin 1+ and 1-
Pin 2+ and 2-
Bosch Security Systems, LLC
ZLX-8-G2, ZLX-12-G2 or ZLX-15-G2 loudspeakers.
Dynacord L1800FD amplifier programmed with the appropriate speaker settings from
SONICUE.
ZLX-12P-G2
n/a
Input B
NL4 Pin Configuration
Used
Not used (pass-through)
User manual
Recommended configurations | en
ELX200-18SP
ZLX-12P-G2
Output B
Output A
Input A
33
2023-10 | 01 |