About Waste Electrical And Electronic Equipment; In The Us - Hitachi FT-01B User Manual

Finger touch unit
Hide thumbs Also See for FT-01B:
Table of Contents

Advertisement

About Waste Electrical and Electronic Equipment

Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical
and Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as
unsorted municipal waste, but use the return and collection systems
according to local law.
NOTE
• Do not install near wireless transmitters, televisions, copy machines,
cooling or heating equipment, or other devices that generate electromagnetic
waves or wireless frequencies.
• Avoid installing in locations with large amounts of dust or locations with
extremely high or low temperature or humidity.
• The Finger Touch function uses infrared rays to detect the position, and so avoid
using in locations where the screen surface is exposed to direct sunlight. Also, if
the Finger Touch function is used in environments where devices that emit infrared
wavelength (such as incandescent lights, halogen lamps, plasma displays, motion
sensors, and automatic lighting sensors) are used nearby, malfunctions may
occur.
• The Finger Touch function may not work smoothly if installed near an inverter
fluorescent lamp or if the light from an inverter fluorescent lamp shines on the screen.
• Install in a location that is not exposed to light sources, direct sunlight, and other
strong beams of light. If a strong beam of light shines on the finger touch sensor
(camera) or screen, the Finger Touch function may not work properly.
• Use by installing at a position where the screen size is 60 to 80 (XGA) / 100
(WXGA) inches when the digital zoom is set to the maximum (100%) and the
KEYSTONE and PERFECT FIT functions are not being used. If the KEYSTONE
and PERFECT FIT functions are used, even if the screen size displayed after
correction is 60 to 80 (XGA) / 100 (WXGA) inches, the finger touch position may
not be applied correctly to the screen, or the finger touch operation may not
respond.
S=1/1

In the US

The following is the label conforming to FDA(21CFR1010.3).
FT-01B
7

Advertisement

Table of Contents
loading

Table of Contents