Installation
Installation Precautions
• This device is an optional product for the Hitachi LCD projectors. It cannot be
used with other projectors.
• When this device is used, install the projector on a ceiling-mounted fixture or a
tabletop use kit. It cannot be used for a floor-mounted installation.
• Install this product on a flat screen where the curvature or bending does not
exceed 2 mm.
Curvature or bending of the screen can cut off the infrared laser beam generated
by the Finger Touch Unit so that the Finger Touch function does not operate.
Also, if the infrared laser beam generated by the Finger Touch Unit becomes too
separated from the screen surface, the intended operation may be unable to be
performed.
2 mm or less
FT-01B
Screen surface
Screen surface
10
Ruler
2 mm or less
Ruler
2 mm or less