Table of Contents
Advertisement
Using menus (Continued)
■ Setup MENU
Language
Select a language used in menu system.The following ten languages are available.
- English
- French (Français)
- Germany (Deutsch)
- Italian (Italiano)
- Spanish (Español)
- Portuguese (Português)
- Japanese (日本語)
- Simplified Chinese (简体中文)
- Traditional Chinese ( 繁體中文 )
- Korean ( 한국어 )
Press
. Select with
H-Keystone
Correct the horizontal keystone distortion of the screen.
Press
. Adjust with
V-Keystone
Correct the vertical keystone distortion of the screen.
Press
. Adjust with
Notes
■
• Depending on the amount of keystone adjustment and the content of images, some infor-
mation may be lost, or the picture quality may suffer.
• Keystone adjustment will not change the shape of the menus (OSD) and the background
(with no signal input).
Lamp Time Reset
Reset the lamp timer to zero.
This should only be done after the lamp has been replaced.
Press
. Confirmation window will appear and select [Yes] with
and press
to reset.
Lamp Power
Set the lamp power.
When lamp power is set to high, the screen becomes brighter, but the fan noise become a
little increased.
Press
. Select from Standard/High with
Fan mode
Set the cooling fan speed.
/ [UP] [DOWN] key.
/ [ - ] (Shrinking leftward) or
/ [ - ] (Shrinking downward) or
/ [ + ] (Shrinking rightward) key
/ [ + ] (Shrinking upward) key
/ [UP] [DOWN] key.
46
/ [ - ] or
/ [ + ] key
Advertisement
Table of Contents
