Toshiba TDP ET20/U Owner's Manual page 44

Sharpness
Adjust the sharpness of the image.
Press . Adjust with
Detail Enhancement
Set the function to enhance detail of the image.
Press . Adjust with
H-position
Adjust horizontal position of the image.
Press . Adjust with
This can be adjusted when input source is Computer or HDMI.
V-position
Adjust vertical position of the image.
Press . Adjust with
This can be adjusted when input source is Computer or HDMI.
Noise Reduction
Adjust the function to reduce screen noise.
Press . Select from Off/Low/Mid/High with
Screen Size
Set the screen size (aspect ratio) of the projection image.
• Press . Select from Full/4:3/Zoom/Theater wide with
• When input signal format is 1080i or 720p, actual screen size is fixed to Full without re-
gard to the screen size setting.
Advanced
Detailed adjustment is available in Advanced MENU.
Press to go to advanced MENU.
Reset
Reset Picture setting MENU adjustments and settings to factory default.
Press . Confirmation window will appear and select [Yes] with
and press to reset.
/ [ - ] (Softer) or / [ + ] (Sharper) key.
/ [ - ] (Lower) or / [ + ] (Higher) key.
/ [ - ] (Move left) or
/ [ - ] (Move down) or
43
/ [ + ] (Move right) key.
/ [ + ] (Move up) key.
/ [UP] [DOWN] key.
/ [UP] [DOWN] key.
/ [ - ] or / [ + ] key