Using Menus; How To Use The Menus - Toshiba TDP ET20/U Owner's Manual

Using menus

You can call up on-screen menus, and conduct a number of adjustments and settings using the
operation buttons
p.18 p.19

■ How to use the menus

The menu shown below is for operation instructions purposes and might differ from the
actual display.
1. Press the [MENU] button.
2. Select a category.
Select the category using
[UP] [DOWN] key. There are fol-
lowing 5 categories:
Input menu
Picture setting menu
Audio setting menu
Setup menu
Status display menu
3. Adjustment & Settings
Press to enter the selected category. Select item with
press again.
The figure shows displays given for operation instructions purposes. As the display may differ
depending one the item, use the following pages as a reference.
4. Press the MENU button.
The category selecting menu is displayed.
5. End Press the MENU button.
(The menu disappears 30 seconds after the last operation.)
on the control panel (main unit side) and remote control.
Display the menu.
/
p.42
p.42
p.45
p.46
p.47
Item
Adjusting / Setting value
Current setting Press
41
/ [UP] [DOWN] key and
key
[MENU] key Press
key
[MENU] key
key to select desired item and press
Displays the current
adjustments and
settings of selected
category.
Item shown with gray
cannot be adjusted
with the current input
source.
key to adjust.
key.