Table of Contents
Advertisement
TDP-ET20 DVD Playback (Continued)
MENU LANGUAGE
DVD menu language can be selected in this menu.
(1) Select MENU LANG in LANGUAGE SETUP page and press
(2) Press
key to select DVD menu language and press
Notes
■
Some DVD video discs may not include your pre-selected language. In this case, the DVD
video player automatically displays disc menus consistent with the disc's initial language
setting.
Playing a disc.
1. Basic playback
(1) Turn on the power and select DVD input.
(2) The DVD startup screen will appear on the screen.
(3) Load the disc in the disc slot with the label side facing up. (If the disc has a label.)
Hold the disc without touching either of its surfaces, align it with the guides, and place
it in position.
Notes
■
Insert a disc horizontally into the DVD disc slot, do not jam or force it strongly, otherwise
the DVD may malfunction or the disc might be damaged.
(4) "LOADING" appears on the screen, then playback starts.
• A menu screen will appear on the screen, if the disc has a title menu.
• Press
and play commences.
(5) Press VOL [+] [-] to adjust the volume.
Notes
■
When using an amplifier, adjust the volume with the amplifier.
(6) Press
or
/
Resume feature
• Depending on the disc you are playing, when you press STOP one time, the DVD memo-
rizes the location where playback is stopped. Press
from the stopped location.
• If you press
again or eject the disc, the DVD will clear the stopped location.
About the Parental Lock screen
If the PASSWORD screen appears after loading a disc and you try to unblock the blocking
status following the screen menu, the DVD player will stop and the DVD startup screen will
appear. If so, set the Enable Rating Blocking in the Locks menu (
to load the disc. After enjoying the DVD movie, reset the Enable Rating Blocking to "On" if
necessary.
on the remote control to select title, then press ENTER. Title is selected
to end playback.
/
or
34
or
key.
key.
to resume the playback
) to "Off." Press
p.31
Advertisement
Table of Contents
