NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Networking
Description
Figure 4-42 Connecting communications cables
----End
4.11.5.2.2 CAN Teamwork + RS485 Monitoring
Step 1 Connect teamwork and monitoring communications cables.
Networking
Protocol
Issue 10 (2024-01-30)
CAN Teamwork
One teamwork network
supports a maximum of 32
units. On the Teamwork
Settings screen of the display
modules of the first and last
units, set Enable teamwork
CAN resistor to Yes.
NO TE
If the Modbus-TCP/SNMP protocol is used, customers can purchase the NetEco (a LAN
switch is required) or a third-party NMS as the monitoring system.
CAN Teamwork
CAN
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation Guide
FE Monitoring
-
RS485 Monitoring
Modbus-RTU
78