NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
4.11.2 Connecting Power Cables
Procedure
Step 1 Open the electric control box outside the unit.
Step 2 Connect one end of the active and standby power cables to the active power
supply terminal/standby power supply terminal/PE terminal through the cable
hole in the electric control box of the unit, and connect the other end to the PDF
or UPS.
Figure 4-32 Connecting power cables
----End
Exception Handling
●
Issue 10 (2024-01-30)
Generally, only the active and standby power supplies are required. The
following figures show the power supply systems.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation Guide
70