NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
11.1 How Do I Issue a Start/Shutdown Command?
You can use the start/shutdown signal over the LCD of the unit, NetEco WebUI, or
hardware port to start or shut down the unit.
Scenario
If the
equipment is
started, issue
a shutdown
command to
shut down
the
equipment.
If the
equipment is
shut down,
issue a start
command to
start the
equipment.
Issue 10 (2024-01-30)
Operation
Method 1: Set the
start/shutdown signal
to shutdown on the
LCD or NetEco WebUI.
Method 2: Connect
the remote start/
shutdown dry
contacts of the
hardware port.
1. Check that the
remote start/
shutdown signal
status of the
hardware port is
start.
2. Set the start/
shutdown signal to
start on the LCD or
NetEco WebUI.
Copyright © Huawei Digital Power Technologies Co., Ltd.
11
Start/Shutdown
Start/Shutdown
Signal Status -
Signal Status -
LCD/NetEco
Hardware Port
WebUI
Shutdown
Start
Start
Shutdown
Start
Start
11 FAQ
FAQ
168