3-5-10. Indoor Unit Sensor Room Temp. Display Setting
Display the room temp. to the operating indoor unit even if remote controller or option sensor is not used.
(4)
(1)
3-5-11. Initialization
Perform the Initialization of this controller.
All registered contents will be deleted and returned to the factory default setting by this function.
Please use this function with great caution.
(1)
En-50
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Indoor Unit Sensor Display Setting].
(4) Tap the [Enable] or [Disable].
(3)
(2)
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Initialization].
(3)
(2)
(4) When initializing this controller, tap the [OK] button.
Wait for a while without turning off the power.
After the initial setting screen appears, set according to the
wizard. →Refer to 1-5.