CITOTOTIG 315DC - CASE COVER REMOVAL
A
B
C
Necessary tool:
-
Screwdriver type PH2
Procedure:
1. Turn on/off switch to off position.
2. Disconnect Input Power from the machine !
3. Remove the 4 screws on the top of the machine (A).
4. Remove the 6 screws on the left and 6 screws on the right side of the machine (B).
5. Remove the 4 screws on the front and 4 screws on the back panel of the machine (C).
6. Remove the front and the rear plastic panels
7. Remove the blue cover case.
8. Follow the input filter discharge procedure !
33