Water Supply - Brother GTX600 NB Instruction Manual

WATER SUPPLY

4.3
As mentioned before, the GTX600 NB has a humidifier to reach and hold the recommended humidifi-
cation. The conductivity of the supplied water has to be <10
If you use the water supply method by tank, make sure that the following conditions are met at all
times:
B
Water supply by tank requires normed distilled water:
· ASTM D 1193-06(2018) — Type 4
· ISO 3696 -1987 — Grade 3
· JIS-K0557 — A1
Do not use drinking/tap water.
If you use the water supply method by tap, make sure to control the conductivity of your water at least
once every week.
A
There should always be enough distilled water in the tank.
There is a conductivity meter mounted on the
water filtration system. If the pointer of the display
is in the green area (<10 μS/cm), everything is in
order. If the value is >10 μS/cm, the de-ionyzer
cartridges needs to be replaced.
Name (Pieces)
Spare Part Number
μS/cm.
A: Humidifier
B: Humidity sensor
C: Feed distilled water tank
D: More than 80 cm,
but not higher than
the main unit (the GTX600 NB)
B
C
B
Cartridge DS150 (2pcs)
N40002074
D
13 / 27