Connecting To A Water Source - Brother GTX600 Quick Start Manual

Connecting to a Water Source

GTX600 features an internal humidifier that is designed to maintain an optimal printing environment. As such, water for
the humidifier is supplied via a Water Supply Tube.
The source of water is dependent on the needs of your facility.
Water can be supplied via:
1. A direct line from pure water, such as a tank of distilled water.
2. Via a water pipe, with a regulator and ion filter to ensure clean water.
I understand that a water source will need to be available prior to installation. If using a water supply line, the
water source must be free of minerals and contaminants.
• Water tube dimensions are OD6 mm 1/4inch
• Do not use the optional humidifier water supply tube to connect to tap water piping.
• If non-pure water, such as tap water, is used, white powdery impurities will adhere to
the inside of the unit, causing damage to the printer and heads.
• If using a regulator in the water line setup, ensure that the pressure supplied is
.2PMa or less to the printer.
IMPORTANT