LOAD PRINTFILE BY PC
3.1
Make sure that the PC is connected to the printer. The latest GTX600 driver and the latest Graphic
Labs should be installed. Double click the printfile to open the GTX File Viewer. The GTX File Viewer
will show a preview of the printfile and the most essential settings for the print.
By clicking on „Send to printer" the printfile will be sent to the GTX600 NB and will appear on the display.
LOAD PRINTFILE BY USB
3.2
Insert the USB-stick with the printfile into the USB-port of the control panel.
Menu
Adjust platen height
Head Cleaning
Test Print
Ink refill
Print Data Load
Testprint1.arx6
Data Load OK
SELECT THE CORRECT PLATEN HEIGHT
3.3
The platen height needs to be chosen accordingly to the thickness of the garment. The garment should
be as near as possible to the printheads, to ensure the best print quality and to prevent ink mist. The
GTX600 NB has an obstacle sensor installed, which prevents any contact between the garment and
the printhead. The platen height has to be set in the menu.
14
16
x
inch
0.86
1200dpi
cc
Select data file
Printfile1.arx6
Printfile2.arx6
1
1
Press OK to load the printfile on the
GTX600 NB. The printer indicates the
successful process with a beep sound. Wait
till the beep sound before you remove the
USB-stick.
9 / 27