Table of Contents
Advertisement
Chapter 8: Product Specification
Electrical (AC Power)
AC Power:
Type of Protection against
Electrical Shock:
Degree of Protection against
Electrical Shock:
Degree of Protection against
Ingress of Water:
Mode of Operation:
Electrical (Battery Power)
Battery Type
Number
Physical (PAL Player)
Device Dimensions
Device Weight
Communication
Display
Memory
Control Interface
Speakers
Biocompatibility
Physical (PAL Sensor Module)
Sensor
Length of wire lead
Biocompatibility
Transportation and Storage
The PAL Device should be transported and stored in temperatures between -4°F and 185°F (-20°C and
85°C), atmospheric pressures between 50 and 106 kPa (7.25 psi to 15.37 psi) and relative humidity
between 10% and 93% R.H.
Each module is designed to continue operation after being exposed to vibration levels as defined in
IEC60068-2-6 (Vibration), IEC 60068-2-35 (Random Vibration Wide Band), and IEC 60068-2-27 Shock
Operating Conditions
The PAL Device should be operated in temperatures between 32°F and 104°F (0°C and 40°C),
atmospheric pressures between 50 and 106 kPa (7.25psi to 15.3psi), and relative humidity between
15% and 90% R.H non-condensing
© 2023 by NeoLight LLC.
All rights reserved.
Input: 100-240V~, 50-60HZ, 0.5A; Output: 9VDC, 0.66A,
Class II Equipment
Type B.F. Applied Part
IP0X
Continuous
Type C 1.5V Alkaline Battery
4
8.25" L x 4.12" W x 3.95" H (20.96 x 10.46 x 10.03 cm)
< 3 lbs. (1.36 Kg)
Via wired bus with PAL Sensor Module
LCD graphic display visible from a distance < 6 feet
Secure Digital (SD) Card (FAT format)
USB-A 2.0 (FAT Format)
4 buttons interface (UP, DOWN, SELECT and POWER)
65 dB (±3) maximum
All patient contacting materials used in the PAL are biocompatible
Piezo
17.72 in (45 cm) with 3.5 mm stereo plug
All patient contacting materials used in the PAL are biocompatible
Page 21 of 30
500055 Rev E
Advertisement
Table of Contents
